This message contains images. If you don't see images, click here to view.
Click here to advertise in this news brief.
  Mobile version   RSS   Subscribe   Unsubscribe   Archive SPE Plastics Industry Resource:     
Home   Membership   Technical Resources   Events   Technical Groups   Online Store March 30, 2011


Unconventional gas a boon to ExxonMobil's plastics profits
Plastics Today    Share   Share on FacebookTwitterShare on LinkedinE-mail
article
ExxonMobil is riding an unprecedented gap in the price differential between crude oil and natural gas, as well as an explosion in its own gas holdings, to record profits in its plastics/chemicals business, while nonintegrated producers or those that rely on petroleum-derived naphtha get squeezed. More



SPE HIGHLIGHTS


ANTEC® 2011: Expectations of Renewal
By Michael Tolinski    Share    Share on FacebookTwitterShare on LinkedinE-mail article
During the first five days of May in Boston, the new spring growth in the region will be a fitting backdrop for the signs of economic renewal sought by ANTEC attendees. Positive economic signs are pointing to a "sunnier" business climate for the event, compared with recent years. One survey reported by Plastics News indicated that 45 percent of reader/responders in 2010 had the attitude that the economy was "very" or "somewhat" favorable. This percentage was greater than the percentage of "unfavorable" responses; and it was much greater than the only 22 percent "favorable" responses in the publication's 2009 survey.

This year's event will couple a perhaps cautiously optimistic mood with the determination of an industry to become even more relevant in the areas of medicine, energy efficiency, and "green" materials. Here is a preview of some of ANTEC 2011's highlights and themes.

This article appears in the March 2011 issue of SPE's Plastics Engineering magazine.
More


Join SPE today and gain access to more than 600 technical papers and presentations covering all aspects of polymer science and plastics technology.




Freeze-drying improves crystallization of biodegradable polymers
SPE Plastics Research Online    Share    Share on FacebookTwitterShare on LinkedinE-mail article
Poly(l-lactide) (PLLA) is one of the most common biodegradable polymers, predominantly used in food and consumer good packaging. Unfortunately, PLLA suffers from poor crystallizability. This limits its broader use because it in turn affects, for example, polymer modulus and annealing time. Thus, practical techniques for modifying its crystallizability are needed. The addition of nucleating agents can promote PLLA crystallization, but these additives impose an environmental burden. More

Intelligent Additive Solutions for Plastics

STRUKTOL® additives provide unique processing improvements for a wide range of plastic compounds including lower viscosities, enhanced dispersion of fillers and superior metal release.
MORE


PLASTICS INDUSTRY NEWS


UK's first mixed plastics recycling facility opened
Waste Management World    Share    Share on FacebookTwitterShare on LinkedinE-mail article
VideoBrief Biffa Polymers - formally Greenstar WES - has opened the UK's first fully integrated plastic packaging sorting and recycling facility. In January 2010 the facility was awarded £1.187 million in funding by the Waste & Resources Action Program, following WRAP research which demonstrated not only the environmental benefits, but also the commercial and technological viability for mixed plastics recycling. More

Free Webinar: Improve Ink, Adhesive & Coating Performance

Learn how to improve surface cleaning, adhesion and functionality while eliminating the use of hazardous chemicals or primers. A wide range of applications will be reviewed for printing, coating, decorating and bonding materials. Register


Global plastics associations take action on marine litter
Packaging Digest    Share    Share on FacebookTwitterShare on LinkedinE-mail article
As part of their overarching contribution to providing sustainable solutions, representatives of plastics organizations from around the globe released a "Global Declaration for Solutions on Marine Litter." The declaration, announced at the 5th International Marine Debris Conference in Honolulu, describes steps that the industries will take — and suggests approaches and platforms for global cooperation and future partnerships. More

Plastics consumption to triple in India in 10 years
Business Standard    Share    Share on FacebookTwitterShare on LinkedinE-mail article
The per capita consumption of plastic in India doubled from 4 kg in 2006 to 8 kg in 2010, and would touch the global average of 27 kg per person by 2020, according to industry representatives. Among the factors driving this growth are the increasing uses of plastics in packaging, infrastructure, agriculture, automotives, health care and FMCG segments. More



Scotland seeks to improve recycling record with pioneering 'carbon metric'
The Guardian    Share    Share on FacebookTwitterShare on LinkedinE-mail article
Councils in Scotland are to dramatically reorganize their recycling schemes by targeting materials that cause the most damage to the climate, such as food waste, textiles and plastics. From 2013, councils and householders will be asked to recycle far more of the waste that has a "high carbon impact" and is more environmentally damaging, under a new "carbon metric". Materials with lower carbon benefits from recycling, such as paper, will become less important. More
DRI-AIR PD2
DUAL BED DRYER
Fully integrated, dual hopper, compact and portable dryer designed for several molding applications.

• Increased productivity with zero downtime for material changes
• Lowest energy costs in the industry
• Ideal for 2-shot or 2 color molding
• Optional blending of color or regrind
• Payback in less than one year

Website www.dri-air.com
Contact sales@dri-air.com
INCOE® OPTI-FLO® Hot Runner Systems
The OPTI-FLO® hot runner manifold design features BTI's patented MeltFlipper® melt rotation technology and are exclusive to INCOE®. The technology provides homogeneous melt distribution and balanced filling to all cavities while avoiding invasive and restrictive mixers. For information on all INCOE® technology, visit www.incoe.com. That’s INCOE® performance…Right From The Start.
FAST RESPONSE -LOW COST - DISTRIBUTOR
CP Polymers is a “JIT” ( just in time ) small to medium sized reseller of prime engineering resins. We specialize in PC and other clear resins.

Call us today for a quote on inventory: 888 342 8080.



Users-Save Solvent and Your Lungs

Free solvent saving, THF-compatible bottle cap ($50 value) available to GPC users responding to the Tosoh Bioscience GPC User Survey available here.


Plastics packaging: Foaming process cut costs in rigid PS sheet
Modern Plastics Worldwide    Share    Share on FacebookTwitterShare on LinkedinE-mail article
Polystyrene supplier Styron introduced its CO2RE processing technology at last fall's K show in Düsseldorf, Germany, and now can point to some concrete commercial successes. The process involves injection of liquid carbon dioxide as a physical foaming agent into the polymer melt during extrusion of rigid PS sheet. The technology is available globally. More

Belgium's plastics managers worry over resin prices
European Plastics News    Share    Share on FacebookTwitterShare on LinkedinE-mail article
Rising plastics resin prices could put recovery in the Belgian plastics industry under pressure, according to Federplast.be, the country's association representing manufacturers of plastic and rubber products. The organization this week released the results of a survey it has carried out among its members, which shows that plastics and rubber industry production volume grew by 5.7 percent in 2010. More

Worlds First True Servo Controlled Ultrasonic Welding Systems
Dukane’s patented iQ Advanced Servo Welder is the next step in the evolution of ultrasonic welding technology. Combining the efficiency and reliability of a 100% digitally controlled Multi-Core iQ Series power supply with the precision of an advanced servo press, the Dukane Advanced iQ Servo Welder delivers unprecedented repeatability, accuracy and reliability to your ultrasonic bonding process. more


Oil and gas producers face higher tax on profits
The Wall Street Journal    Share    Share on FacebookTwitterShare on LinkedinE-mail article
The U.K. government promised to help people facing rising motoring costs by abolishing a plan of regular increases to fuel taxes and instead imposing a hefty tax increase on the profits of oil and gas producers. Consumer groups welcomed the move at a time when average real incomes in the U.K. are declining, but oil industry experts warned that the tax increase will discourage companies from operating in the U.K. North Sea, where production and investment are already in long-term decline. More



Nearly all laid-off Detroit 3 workers are back to work
Automotive News    Share    Share on FacebookTwitterShare on LinkedinE-mail
article
The Detroit 3 are on the verge of having full employment at their U.S. operations after several years of hardship and layoffs, UAW officials said today at the union's special bargaining convention in Detroit. UAW Vice President Joe Ashton said the final 2,000 hourly workers at General Motors on layoff will be back to work by September. More


Plasma Treating Webinar

Learn how atmospheric plasma can improve adhesion for printing, coating, decorating and bonding without chemicals or liquid primers.


Insist on the Original Smartflow®


Smartflow Flowmeters provide reliable flow, temperature, pressure and turbulent flow information. Call your distributor today!

SPE Industry Update
Colby Horton, Vice President of Publishing, 469.420.2601   Download media kit
Steve Brittain, Sr. Content Editor, 469.420.2625   Contribute news
This edition of the SPE Industry Update was sent to ##Email##. To unsubscribe, click here. Did someone forward this edition to you? Subscribe here -- it's free!
Recent issues
March 23, 2011
Dedicated - Sigmasoft
March 16, 2011
March 9, 2011
View full archive



7701 Las Colinas Ridge, Ste. 800, Irving, TX 75063