This message was sent to ##Email##
|
|
|
IPC
IPC’s 2015 Wage Rate & Salary Study for the North American Electronics Assembly Industry is a valuable tool for electronics assembly companies to gauge the competitiveness of their compensation, benefits and policies in competing for the best talent in the industry.
READ MORE
IPC
Using outdated test designs will do little to properly address modern electronic technology needs. Stay ahead of your competition by updating your processes to match the high-reliability demands with IPC-2221B Coupon Generator.
READ MORE
IPC
Quality comes from preparation, and in the electronics industry, that statement couldn’t be truer. You see, every step of the printed circuit board process is important. There is no room for shortcuts.
READ MORE
Promoted by
|
|
|
 |
IPC
IPC has released two new amendments that address evolving manufacturing requirements: J-STD-001F, Requirements for Soldered Electrical and Electronic Assemblies, Amendment 1 and IPC-A-610F, Acceptability of Electronic Assemblies, Amendment 1.
READ MORE
IPC
Success in the world of high-reliability electronics is earned by forward thinkers—so come to IPC APEX EXPO 2016 and get the year's highest concentration of forward thinking.
READ MORE
 |
|
The printer is based on the proven SERIO platform concept and can be upgraded at any time with a wide range of options and features to adapt it to individual needs. With a core cycle time of seven seconds, the SERIO 5000 is one of the most accurate and fastest printers in its class. See a live demonstration at IPC APEX in March.
|
|
IPC
IPC APEX EXPO 2016 attendees can meet with electronics industry innovators and connect with peers in one place at one time at the Las Vegas Convention Center, March 13–17.
READ MORE
IPC
IPC Standards Gap Analysis (SGA), examines manufacturing processes to uncover inconsistencies and provides a confidential report highlighting areas where improvements can be made.
READ MORE
IPC
Plan your professional development/educational pursuits with IPC’s 2016 Programs Calendar. Maximize your time and efforts by coordinating your schedule with ours.
READ MORE
IPC
IPC EMS Program Management Training and Certification is a three-part, multi-focused educational program for all levels of EMS management that culminates with the valuable CEPM credentials.
READ MORE
 |
|
Industrial & commercial humidification for every application. Our experts are always on hand to support and guide you through your humidification or evaporative cooling project. If you have a humidity related question or require advice on a specific project please contact us.
|
|
IPC
This video training program explains the advantages and challenges of area grid arrays, including component descriptions and terminology and provides a visual overview of removal / replacement procedures for BGAs and QFNs, using both convection and IR equipment.
READ MORE
IPC
What type of failure mechanism is associated with a HiPot test failure on a 750W switching power supply?
READ MORE
|
|
 |
|
BEX's commitment to innovation has made us an industry leader. At BEX we are constantly expanding and improving our product line. This website shows the most popular of spray nozzle and tank mixing eductor products. However, BEX also makes a wide range of specialty products to each customer's own demanding specifications.
|
|
|
|
|
 |
|
What has been learned about cleaning assemblies with array packages in 30 years? A lot, but this package style still remains one of the toughest parts on the board to clean properly. Review the history and current standards in “Cleaning Array Packages”.
|
|
|
|
IPC
View recently released standards including
IPC-T-50M,
IPC-4101D,
WAM1,
IPC-7801,
IPC-A-610F,
IPC J-STD-001F,
IPC-1071A, and translations; market research documents including
BENCHE-15 and
WAGEA-15; multimedia presentations; technical papers and more.
READ MORE
IPC
View IPC documents under development.
READ MORE
|
Recycle your dross using MS2 and reclaim up to 90% solder from your dross! MORE
|
|
|
|
Kyowa Electronic Instruments is a Japanese manufacturer of strain gage, strain gage type sensors, data acquisition system, and software. MORE
|
|
|
|
IPC
AAI Corporation Inc. (Hunt Valley, Md.) recently celebrated its 25th year as an IPC member.
See other companies celebrating membership anniversaries.
New Members
Invest in your company by joining IPC and experience the membership benefits of the industry’s premier global association. Learn more about IPC membership.
READ MORE
By Alan Kelsky
At the end of 2015, A.T. Kearny Consulting issued its U.S. Reshoring Index. In 2015, the Index dropped to minus-115 — down from minus-30 in 2014. This represents the largest year-over-year decrease in the last 10 years. Some of the study findings were unanticipated as they run counter to other manufacturing gurus' points of view. Though some industry watchers disagree with the report, many analysts have come to the same conclusions.
READ MORE
North Star Imaging, Inc
When making an investment into sophisticated equipment such as X-ray and Computed Tomography equipment, you should ensure that you acquire the right level and type of Non-Destructive Testing (NDT) training, to fit your level of learning…. LEARN MORE
READ MORE
PCB007
The use of structural metal in the manufacture of electronic circuits has been a part of the electronics’ industry technology toolkit for many decades. For example, metal chassis structures were required and used in the early days of the electronics industry to both support the weight and handle the heat generated by the vacuum tube components that were the transistors of their day.
READ MORE
R&D Magazine
A thin coating of graphene nanoribbons in epoxy developed at Rice University has proven effective at melting ice on a helicopter blade.
The coating by the Rice lab of chemist James Tour may be an effective real-time de-icer for aircraft, wind turbines, transmission lines and other surfaces exposed to winter weather, according to a new paper in the American Chemical Society journal ACS Applied Materials and Interfaces.
READ MORE
Missed last week's issue? See which articles your colleagues read most.
|
Don't be left behind. Click here to see what else you missed.
|
|
|
|
 |
|
The K5000 Depaneling system from FKN Systek can separate up to 14 scorelines in one pass. LED panels up to 10.6" wide can be separated by passing through the quick change blade cartridge. The in-line system with SMEMA interface can process one panel every 30 seconds. Go to fknsystek.com for more information.
|
 |
|
Are you characterizing your equipment to optimize the conformal coating process? Check out Nordson ASYMTEK’s article.
|
|
|
|
|
|
|
 7701 Las Colinas Ridge, Ste. 800, Irving, TX 75063
|