As a subscriber to IPC Global Insight, you will receive occasional messages from one of our sponsors. You may unsubscribe from future sponsor emails by clicking here.

How to rework heat sensitive components?

Reworking heat sensitive components

Reworking MLCC by profiles with JBC AM120 tweezers

The main factors contributing to cracking Multilayer Ceramic Capacitors (MLCC) are the brittleness of the ceramic materials and the thermal and mechanical stresses associated to SMT assembly processes.

During manual rework one of the main risks for these MLCC is the thermal shock that takes place when the soldering tip touches directly the component. When this happens, all the heat on the tip is transferred without control to the capacitor creating cracks on it.

In order to mitigate damage to MLCCs, manufacturers have been providing guidelines to reduce the risk of cracking like applying the soldering tip only to the pad so the heat is transferred to lead through the solder alloy, preheating the chip to more than 150°C to reduce the temperature gradient that takes place as soon as the soldering tip is applied, etc.

JBC Soldering introduces the final solution for reworking thermal shock sensitive components like MLCC capacitors: Dynamic Soldering Profiles for hand soldering tools.
Available for the following stations, NASE-C, NANE-C, DDE-C, DME-A, HDE-D. This new functionality allows using dynamic profiles in order to control the temperature of the component during all the phases of the soldering process (preheating, soak, reflow), in accordance with IPC J-STD-001G Section 4.6, emulting the heating process in a reflow oven.

Now, by combining the new Dynamic Soldering Profiles functionality with the most precise JBC rework tools, it is possible to reliably rework MLCC capacitors as small as 008004 and other thermal shock sensitive components individually eliminating the risk of disturbing nearby components.

Along with the Most Efficient Soldering System , JBC Soldering makes possible the rework of high-reliability PCBs for industries including Military, Aerospace, Automotive and Medical.

Need further information?
Contact us
You can contact JBC Soldering Tools at: +34 93 325 32 00 or by email:
Ramón y Cajal, 3 08750 Molins de rei, Barcelona, SPAIN
7701 Las Colinas Ridge, Ste. 800, Irving, TX 75063