This message was sent to ##Email##
|
|
|
IPC
Acting U.S. Securities and Exchange Commission (SEC) Chairman Mike Piwowar said in an April 7, 2017 statement that the SEC is suspending enforcement of the costliest requirements of its conflict minerals rule.
READ MORE
IPC
On April 3, 2017, the European Union (EU) Council voted to adopt a regulation regarding the sourcing of conflict minerals in high risk zones. Approval by the EU Council is the end of the formal legislative process and the regulation, which was approved by the European Parliament in March, will take effect in 2021.
READ MORE
IPC
To better serve the electronics industry, IPC is providing a fully marked up "redline document" for this standard. In fact, this redline document is designed to show side by side comparisons of the changes.
READ MORE
Promoted by
|
|
|
 |
IPC
IPC worldwide membership has climbed to an all-time high in 2017 with more than 4,000 member sites in 79 countries as companies in the electronics manufacturing industry continue to acknowledge the strong value of IPC’s product and service offerings.
READ MORE
IPC
On March 27, 2017, IPC filed comments in response to a March 7, 2017 Department of Commerce (DOC) Request for Information on the Impact (RFI) of Federal Regulations on Domestic Manufacturing.
READ MORE
IPC
IPC and ITI are again joining forces to connect you with leading industry speakers, the latest trends, and networking opportunities at the 2017 Emerging & Critical Environmental Product Regulations Conference.
READ MORE
IPC
The Connected Factory Initiative is growing rapidly with nearly 90 members currently participating in the committee. There are 6 software vendors, 12 Tier One EMS and OEM manufacturers, and 37 machine and device vendors.
READ MORE
 |
|
Lead Free Soldering, No-Clean Flux
ECOFREC™ provides excellent soldering in lead-free as well in leaded, both in wave and in selective wave soldering applications. - Excellent through-hole wetting - No microballing - Compatible with different PCB lead-free finishing as Ni/Au, Sn, Ag, HAL, OSP, even after heat cycle www.inventecusa.com www.inventec.dehon.com
|
|
IPC
IPC President and CEO John Mitchell introduces IPC’s Global Policy Framework, a living document that lists IPC’s guiding principles and specific policy concerns, and guides all of the association’s advocacy work.
READ MORE
IPC
This year at IMPACT Washington, D.C., IPC will present the Government IMPACT Award to Reps. John Shimkus (R-IL) and Kurt Schrader (D-OR) for their willingness to take leadership action in support of the electronics manufacturing industry.
READ MORE
 |
|
Don't sell your dross for a fraction of its value, recycle it into new solder bars using MS2. Email sales@pkaymetal.com for details. 323-585-5058
|
|
IPC
IPC has launched IPC Global Marketplace, an innovative buyer’s guide that enables electronics industry professionals to easily locate the products and services they need to effectively run their business.
READ MORE
IPC
IPC invites engineers, researchers, academics, technical experts and industry leaders to submit abstracts for IPC APEX EXPO® 2018 to be held at the San Diego Convention Center, February 24-March 1, 2018.
READ MORE
 |
|
The New TF 1800 BGA/SMD Rework Station from PACE • Revolutionary Convective Inductive Heater • Ultra-High Precision 28µm Placement Capability • New All-in-one Intuitive Software • 1000 Watt Height-Adjustable Bottom-Side Preheater Watch Video || Product Web Page
|
|
IPC
IPC’s Hand Soldering Competition at SMT Hybrid Packaging 2017 will see skilled competitors go soldering iron to soldering iron, May 16-18, as they compete for cash prizes and a coveted spot at the IPC Hand Soldering World Championship located in Munich, Germany, this November.
READ MORE
IPC
IPC places a high priority on government relations because so many public policy debates have large impacts on our industry. Take a look into the policy issues IPC is working on, the strategies and tactics we use, and how IPC members can get involved in advocating for our industry. READ MORE
READ MORE
|
The Strain Rate Analysis system was developed in accordance to IPC/JEDEC-9704A-2012, to provide user friendly measurement guidance and report creation capability. MORE
|
|
|
|
Sonix has pioneered many of the breakthroughs in image accuracy and process productivity that have helped wafer and chip manufacturers literally transform the world. MORE
|
|
|
|
IPC
Some say the only way to learn is through failure. When it comes to Class 3 electronics, failure is not an option because the results can be catastrophic. Education is critical. Join us at IPC Reliability Forum: Manufacturing High-Performance Electronics, April 26–27.
READ MORE
IPC
IPC and WHMA are organizing their first European wire harness conference to identify some of these challenges, explain IPC/WHMA-A-620 in more depth and how it can help your business. Abstracts for technical presentations are being requested from industry.
READ MORE
IPC
This standard is an essential resource for anyone involved in repairing, supplying materials and reworking electronic assembles. Revision C has been completely updated to meet 2017 best industry practices, common procedures and general information on rework, modification and repair of electronic assemblies.
READ MORE
IPC
Plan your professional development with IPC's 2016/2017 Programs Calendar. Maximize your time and efforts by coordinating your schedule with ours.
READ MORE
IPC
This IPC training video is designed for any employees that use a hand soldering iron. As Part 1 of the new Surface Mount Component Soldering/Rework series, DVD-144C shows the best way to install surface mount components manually – using a standard hand soldering iron.
READ MORE
IPC
Are there any standards or guidelines for how PCBs are laid out when dealing with small components in one area and large thermal mass components and ground planes in another area and being successful in wave soldering or reflow?
READ MORE
IPC
View recently released standards including IPC-1782, IPC/WHMA-A-620C, IPC-7711/21C, IPC-6018C, IPC-6012DA, IPC-4562A-WAM1 and translations; market research documents including BENCHE-16 and MR-PROCONSUB; multimedia presentations; technical papers and more.
READ MORE
IPC
Standards for Ballot and Final Drafts
View IPC documents under development.
IPC
Esterline Interface Technologies (Coeur D Alene,Idaho) celebrated its 25th year as an IPC member. See other companies celebrating membership anniversaries.
Member Anniversaries
New Members
Invest in your company by joining IPC and experience the membership benefits of the industry’s premier global association. Learn more about IPC membership.
Phys.org
Research scientists at INM – Leibniz Institute for New Materials have developed a new type of hybrid inks which allows electronic circuits to be applied to paper directly from a pen.
Flexible circuits can be produced inexpensively on foil or paper using printing processes and permit futuristic designs with curved diodes or input elements. This requires printable electronic materials that retain a high level of conductivity during usage in spite of their curved surfaces.
READ MORE
R&D Magazine
Researchers may have unlocked several new applications in printed electronics, creating fabricated printed transistors consisting entirely of 2-D nanomaterials.
Researchers at AMBER in Ireland, created low-cost thin-film transistors from networks of exfoliated dispersions of 2-D materials with graphene contacts. This technology could help develop new applications in a number of ways, including developing food packaging that displays a digital countdown to warn you of spoiling, wine labels that alert you when your white wine is at its optimum temperature, or even a windowpane that shows the day’s forecast.
READ MORE
EIN007
Research and markets has announced the addition of the "The Global Market for Graphene in Batteries and Supercapacitors" report to their offering.
With global energy demands ever increasing, allied to efforts to reduce the use of fossil fuel and eliminate air pollutions, it is now essential to provide efficient, cost-effective, and environmental friendly energy storage devices. The growing market for smart grit networks, electric vehicles and plug-in hybrid electric vehicles is also driving the market for improving the energy density of rechargeable batteries.
READ MORE
Date |
Event |
Location |
April 25–27, 2017
|
The 14th Electronic Circuits World Convention |
KINTEX, Goyang City, S. Korea
|
April 26–27, 2017
|
IPC Reliability Forum: Manufacturing High-Performance Products |
Chicago, IL, USA
|
May 1–3, 2017
|
IMPACT Washington D.C. 2017 |
Washington, D.C., USA
|
May 10, 2017
|
Emerging Technologies |
For IPC Members Only
|
Missed last week's issue? See which articles your colleagues read most.
|
Don't be left behind. Click here to see what else you missed.
|
|
|
|
|
|
|
|
|
 7701 Las Colinas Ridge, Ste. 800, Irving, TX 75063
|